SEREN R301 Operator's Manual download pdf (Page 44)

RX01/LX01 SERIES RF POWER SUPPLY OPERATOR’S MANUAL

SERIAL COMMAND DETAILS

COMMAND COMMAND DETAIL APPLIES TO

ddddd is the maximum power, in Watts

XXXXXXX is a 7-character ASCII mapped string as

described below (characters are counted left-to-right):

Character # 1: Control Source

2 = Serial Interface, 1 = Analog Interface, 0 = Front Panel

Character # 2: RF Output Regulation Feedback Source

3 = Internal Sensor (RF Power Control)

0 = External FEEDBACK signal (DC Voltage Control)

Character #3: Setpoint Source

2 = Serial Interface, 1 = Analog Interface, 0 = Front Panel

Character #4: Status Flags (bit-mapped ASCII)

Bit 3: 1 = RF ON, 0 = RF OFF

Bit 2: 1 = Reflected Limit active, 0 = Reflected Limit inactive

Bit 1: 1 = Max Power Limit active, 0 = Max Power Limit inactive

Bit 0: 1 = PA Current Limit active, 0 = PA Current Limit inactive

Character #5: Status Flags (bit-mapped ASCII)

Bit 3: 1 = RFON&OK, 0 = Ref Power alarm threshold exceeded

Bit 2: 1 = Dissipation Limit active, 0 = Dissipation Limit inactive

Bit 1: 1 = CEX is in Slave Mode, 0 = CEX is in Master Mode

Bit 0: 1 = Pulse Mode active, 0 = Pulse Mode inactive

Character #6: Status Flags (bit-mapped ASCII)

Bit 3: Not Used/Reserved

Bit 2: Not Used/Reserved

Bit 1: 1 = External Interlock open, 0 = External Interlock OK

Bit 0: 1 = Temperature Alarm active, 0 = Temperature Alarm inactive

Character #7: Communication Link Status

Bit 0: 1 = Fault, 0 = OK

R Query Status of the RF Power Supply (Short Form)

Returns the current status of the RF Power Supply, in the form of a mapped

string, terminated with <cr>. The mapped string does not

include Power

Setpoint, Forward and Reflected Power, and maximum power.

Command: R<cr>

Response: XXXXXXX<cr>

Where XXXXXXX is a 7-character ASCII mapped string as described

below (characters are counted left-to-right):

All

Page 36

Seren IPS Inc.

6100220000 Rev. 1.09

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 209 210

No comments

SEREN R301 Operator's Manual Page 44