SEREN R301 Operator's Manual download pdf (Page 141)

RX01/LX01 SERIES RF POWER SUPPLY OPERATOR’S MANUAL

R601 Specifications

Voltage: 90-125V or 190-264V (universal input), Single Phase.

There are no transformer voltage taps to configure.

AC mains voltage specified at time of order determines supplied power cord

AC Mains

Input Power

Frequency: 47-63 HZ

Current: 15A Maximum.

Power:

Power required: 1360VA Maximum

Overcurrent Protection: Rear Panel Circuit Breaker,

2x 1.5A ¼”x1-1/4” time-delay fuses.

Power Cord

Supplied

(specified at

time of order)

90-125V: 14/3 Type SJT, 2m length, with IEC320-C13 female connector to

NEMA 5-15P plug. Seren P/N 4500910000

190-264V: 14/3 Type SJT, 2m length, with IEC320-C13 female connector to

NEMA L6-15P plug. Seren P/N 4500910001

Output: High Range: 0 to 600 Watts into 50 Ohms

Low Range: 0 to 60 Watts into 50 Ohms

Maximum Reflected

Power:

100 Watts

Frequency: 13.56 MHz, Fixed.

Leveling: Forward Power, Load (Net) Power,

External Feedback (RF or DC Probe)

Frequency Stability: 0.005% Short-term

Power Stability: 0.5% Long Term, +/- 1 Watt

Output Impedance: 50 Ohms, +/-5 Ohms Nominal

Metering Accuracy:

(Forward Power)

+/- 3% of Reading

Temperature Coefficient: 0.25% per °C

Forward Power

Regulation:

+/- 1% into 50 Ohms

Load Tolerance: No oscillation or failure into a mismatch

condition.

Protection: Forward power limits on current, transistor power

dissipation, and excessive reflected power. Unit

is short-circuit and open-circuit protected. Unit is

thermally protected.

Page 133

Seren IPS Inc.

6100220000 Rev. 1.09

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 209 210

Comments to this Manuals

No comments

SEREN R301 Operator's Manual Page 141

Comments to this Manuals