SEREN R301 Operator's Manual download pdf (Page 16)

RX01/LX01 SERIES RF POWER SUPPLY OPERATOR’S MANUAL

Connection to AC Mains:

BEFORE connecting the RF Power Supply the AC mains, verify the AC Mains voltage

marked on the ratings plate, located on the top or side panel of the RF Power Supply, is

compatible with your AC Mains voltage. If the AC Mains voltage on the ratings plate is

not compatible with your AC Mains voltage, contact a Seren IPS Inc. service depot for

assistance.

Models with detachable power cords:

Step Action

1 Ensure a suitable load is connected to the rear panel RF OUTPUT connector

2 Ensure the front panel power switch is in the “OFF” (0) position

3 Ensure the rear panel circuit breaker is in the “OFF” (0) position

4 Plug the power cord into the power inlet on the rear panel of the RF power

supply

5 Plug the power cord into the AC Mains power outlet

Models with captive power cords:

Step Action

1 Ensure a suitable load is connected to the rear panel RF OUTPUT connector

2 Ensure the front panel power switch is in the “OFF” (0) position

3 Ensure the rear panel circuit breaker is in the “OFF” (0) position

4 Connect the power cord to the AC Mains power source

CAUTION: CHECK YOUR MAINS VOLTAGE AND THE

MAINS VOLTAGE SPECIFIED ON THE RATINGS PLATE

OR CONSULT A QUALIFIED ELECTRICIAN BEFORE

CONNECTING THE RF POWER SUPPLY TO MAINS

POWER. CONNECTING THE RF POWER SUPPLY TO

THE WRONG MAINS VOLTAGE MAY DAMAGE THE RF

POWER SUPPLY AND VOID THE WARRANTY.

Page 8

Seren IPS Inc.

6100220000 Rev. 1.09

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 209 210

No comments

SEREN R301 Operator's Manual Page 16